korocite
Jun 28 2012, 10:21 AM
Round four is now open and quite appropriate for the imminent release of the new 40k. The die has been cast,
Modern+ Vehicle/warmachine.
Registration photos are due by 15th July. This round will end one week earlier than usual, finishing at midday on Thursday 23rd August due to other commitments that may take up some of my time at the end of the August.
As per usual, any work in progress pics are welcome.
Steve
kajh
Jun 28 2012, 10:30 AM
QUOTE(korocite @ Jun 28 2012, 10:21 AM)

Round four is now open and quite appropriate for the imminent release of the new 40k. The die has been cast,
Modern+ Vehicle/warmachine.
Awesome. I need to finish a vehicle or two for The Fists.
I have a LRC done to the basecoat stage which I'd like to complete. Can I use this? While this is an advantage (less work to do as already assembled, undercoated and basecoated), nothing creative has been done.
If allowed, I am happy to remove myself from any prize contention, as am starting 3-4 hours into the project.
Regards,
Andrew.
Mono
Jun 28 2012, 10:41 AM
I would be looking to do a Storm Raven. And while I have also now planning to radically change the paint scheme. while it was originally going to be a matching pair for my other stormraven I am now planning on making it to match my relic condemptor dreads in style and paint the front to look something like a grey knight helmet. SO work doe so far would only count as a base coat.
korocite
Jun 28 2012, 10:55 AM
That sounds fine for both of you. I have no issue with you both being in the running for the prize.
I feel the need to do something involving a bit of conversion. Maybe one of the imperial guard tanks, not sure which yet. I have been having a lot of fun with command tanks in Open General, especially the Panther which is an awesome unit when it has some experience under the hood, so this may form some of the inspiration.
Steve
Plebicidal
Jun 28 2012, 11:19 AM
I have a heavily converted landraider (including LEDs etc!) that hasnt seen any paint yet.. otherwise ill just slap some paint on a rhino
Sync
Jun 28 2012, 12:34 PM
I just received the Warpath Fate of the Forgestar set - I'll paint up one of these fellas for round four:
korocite
Jun 28 2012, 12:45 PM
@ Plebicidal, excellent, I look forward to seeing a land raider that lights up.
@ sync, I think this will be our first ever entry from the Mantic range! Is there any games system that you do not play???
Steve
Sync
Jun 28 2012, 03:37 PM
QUOTE(korocite @ Jun 28 2012, 12:45 PM)

@ sync, I think this will be our first ever entry from the Mantic range! Is there any games system that you do not play???
Well... I don't really 'play' game systems per-se

But I have made a promise to myself to learn how to play 40K with the release of 6th edition!
But otherwise I just buy models that I think look cool!
Plebicidal
Jun 28 2012, 08:07 PM
Cool!
In that case, this is where im up to:
My Iron Legion modelling diary.Literally havent touched it since then..
For the Horde
Jul 1 2012, 06:36 PM
i will go for this challenge and attempt a stormtalon, maybe 2..........
Mono
Jul 2 2012, 12:40 PM
challenge photo from saturday

and progress shot of last nights work
Sync
Jul 4 2012, 12:49 PM
Here's my registration shot - the Forge Father Jotunn Heavy Cannon Assembled!

I've started work on a Forge Father army, if anyone's interested:
http://descent-of-angels.blogspot.com.au/
korocite
Jul 7 2012, 09:26 PM
Not much to see yet, but this is the beginning of my entry, a tank for the Imperial Guard.

Steve
korocite
Jul 9 2012, 12:53 PM
kajh
Jul 9 2012, 01:27 PM
QUOTE(korocite @ Jul 9 2012, 12:53 PM)

Progress pics.
Steve - looking interesting. Given the level of customisation, is this going to be a particular type of tank, or just something which looks cool?
Cya,
Andrew.
korocite
Jul 9 2012, 03:15 PM
Fluff factor 7 - the plan is for it to be a command tank as inspired by the command tanks in Open General. The lack of sponsons and armour plating on the side is to reduce weight and give it greater speed so it can zip around the battlefield lending its experience to as many units as possible in a given turn. I have borrowed ideas from Panzer types 1 through 4. The current plan is for it to have a wider than normal leman russ turret and armed with either twin or quad heavy stubbers. A hull mounted multimelta will be useful for any armoured surprises that appear.
or...
This will be completely useless on the gaming table. It is designed to look cool.
Steve
PS I went down to the hobby store today to look for the plastic pipe/tubing pack I mentioned. They did not have it - the owner had just completed stocktake and did not recall ever seeing it.
kajh
Jul 9 2012, 04:34 PM
QUOTE(korocite @ Jul 9 2012, 03:15 PM)

PS I went down to the hobby store today to look for the plastic pipe/tubing pack I mentioned. They did not have it - the owner had just completed stocktake and did not recall ever seeing it.
No worries - thanks very much for looking anyway.
Cya,
Andrew.
Sync
Jul 12 2012, 07:07 PM
Now that I'm learning 40k, and I'm painting up my Chaos Space Marines, I thought I'd change my entry to something I plan on using on the table.
Chaos Dreadnought!
korocite
Jul 13 2012, 10:53 AM
We have several registered contestants with a good range of different vehicles. Registration pics are due by the 15th July (only two days left) for those who have not already done so.
Steve
Sync
Jul 13 2012, 07:18 PM
QUOTE(Sync @ Jul 12 2012, 07:07 PM)

Chaos Dreadnought!
Oh, I should mention that I acquired this model second-hand - it's not half painted already!
It's currently got the Iron Warriors paint scheme, but I plan on repainting it my own Chaos Space Marine Chapter!
korocite
Jul 13 2012, 09:57 PM
Some more progress pics


I up armoured the turret to keep the field marshal a bit safer. Rivets will be added soon.
Steve
kajh
Jul 14 2012, 12:11 PM
Very noice!

Love the progress update pics.
Cya,
Andrew.
P.S. After a hellish week finishing off a project - declaring for this challenge. Will paint up this guy.
For the Horde
Jul 15 2012, 06:59 PM
hey guys,
i changed my entry to 2 night scythes/doom scythes from the necron codex!! heres hoping i can get them painted by then. there are also 2 bases to go with them but i am waiting on them to arrive.
as you will notice there will be a bit of an egyptian theme to it!!


Mono
Jul 15 2012, 07:55 PM
stay away from the stargate
For the Horde
Jul 15 2012, 09:15 PM
might do that as an objective
korocite
Jul 23 2012, 09:32 PM
More progress pics.

This is how it looks before I test out the new airbrush on it. It has been primed with army painter grey, washed with watered down vallejo black wash, dry brushed with codex grey, then drybrushed with lighter grey. Tomorrow is the day I attempt to use an airbrush for the first time.
Steve
kajh
Jul 23 2012, 09:58 PM
[quote name='korocite' date='Jul 23 2012, 09:32 PM' post='2071315']Tomorrow is the day I attempt to use an airbrush for the first time./quote]
Looking good so far - good luck with the airbrush!

Cya,
Andrew.
korocite
Jul 24 2012, 07:47 PM
I think it fair to say that my attempts at airbrushing resulted in dismal failure.


It would appear that I have a lot to learn...
My idea was based on the image I saw of a tiger tank in a book that my uncle and aunt gave me when i was a kid. The tiger had been hastily sprayed in a white winter colour scheme over the original grey/green with patches of the original colour scheme showing through. I might have to re-think this one.
Other completely unrelated work in progress, just for giggles,

Steve
dvaston
Jul 24 2012, 09:39 PM
Steve - dont be harsh on yourself.
It looks like you are using the airbrush to do faint camo lines on the tank?
I thought it was usually best to just use the airbrush just for doing consistent undercoats and basecoats.
It is of course possible to do finer airbrushing, but that takes a lot of practice I would imagine.
I think you attempted some fairly fancy airbrushing, which is brave for a first go. Anyway I wish you luck on your 2nd attempt, which Im sure will be up to your usual high standards.
And that reminds me I need to actually get my airbrush out of its box and start using it myself...

QUOTE(korocite @ Jul 24 2012, 07:47 PM)

I think it fair to say that my attempts at airbrushing resulted in dismal failure.
...
Plebicidal
Jul 24 2012, 10:06 PM
If you want straight or angular lines / cammo use masking tape
If you want irregular lines / cammo use bluetac
I tend to use my airbrush for base colours & mid tones.
Its perfect for edging panels on tanks etc.
Sync
Jul 25 2012, 06:56 AM
Awesome work as always Steve

Love the unique colour scheme on the Menoth too - I still owe you that WM Demo!
korocite
Jul 25 2012, 11:13 AM
Thanks for the replies.
@ Dave, I was probably being a bit ambitious for my first go. At the very least I learned how to clean it!
@ Plebicidal, I reckon i will use the airbrush to base coat it and then try a camouflage scheme with masking rather than free hand. Small steps I suppose.
@ Sync, the purple and white feels somewhat appropriate for self important religious zealots.
I think my main issue was not thinning the paint enough which resulted in inconsistent trigger action. I will try again.
Steve
Plebicidal
Jul 25 2012, 11:18 AM
QUOTE(korocite @ Jul 25 2012, 11:13 AM)

Thanks for the replies.
@ Dave, I was probably being a bit ambitious for my first go. At the very least I learned how to clean it!
@ Plebicidal, I reckon i will use the airbrush to base coat it and then try a camouflage scheme with masking rather than free hand. Small steps I suppose.
@ Sync, the purple and white feels somewhat appropriate for self important religious zealots.
I think my main issue was not thinning the paint enough which resulted in inconsistent trigger action. I will try again.
Steve
Paint consistency is the most important step in learning to airbrush.
I use water (or sometimes windex) in a dropper bottle so I can control how much I thin the paint.
Check out VJ air range.
I tend to use 3:1 vj air to water through my airbrush at ~30 - 40psi.
korocite
Aug 5 2012, 04:32 PM
The second attempt at airbrushing was only marginally better than the first. I think I thinned the paint too much, or had the psi incorrect, or the moon was in the wrong phase.

A few coats with the masking tape in place did the job reasonably.
The finished tank.


I had lots of fun playing with mig pigments and chalks for the weathering. Imperial armour masterclass was a useful resource for this challenge.
Steve
kajh
Aug 5 2012, 10:22 PM
Damn good recover, Steve - that looks great!

Really nice work.
Cya,
Andrew.
Plebicidal
Aug 6 2012, 11:08 AM
Nice work!
For the Horde
Aug 6 2012, 02:57 PM
When is the challenge over??
korocite
Aug 6 2012, 04:38 PM
This round ends on Thursday 23rd August at midday. Has anyone made any more progress?
Steve
kajh
Aug 6 2012, 05:49 PM
QUOTE(korocite @ Aug 6 2012, 04:38 PM)

This round ends on Thursday 23rd August at midday. Has anyone made any more progress?
I've done a bunch of blocking out, but that's about it on my land raider, though I've made an imperial aquila stencil for the top. (Will use airbrush to create the shape, then plan some freehand - maybe - to add details and highlights.)
My modelling time is getting hammered again - bid work required.

Am getting sick of it.
Cya,
Andrew.
Mono
Aug 7 2012, 09:26 AM
I am basically down to detailing, but I do need to pick up some stuff for the detailing
For the Horde
Aug 7 2012, 11:14 AM
It's undercoated and ready to be painted. Just need to work on an eye popping scheme.
Plebicidal
Aug 7 2012, 11:30 AM
Im finishing off my squad & 40k monster entries for GD then turning my attention back to the vehicle entry.
Sync
Aug 8 2012, 05:42 PM
Undercoated and based my CSM Dready!
korocite
Aug 17 2012, 09:59 AM
Just under a week to go now, this round finishes at midday on Thursday 23rd August.
Steve
Sync
Aug 17 2012, 01:06 PM
Better get on it!
P.S. Does a Dreadnought count as a vehicle/warmachine? I guess if a Warmachine Warjack counts it probably does...
Plebicidal
Aug 17 2012, 01:17 PM
QUOTE(Sync @ Aug 17 2012, 01:06 PM)

Better get on it!
P.S. Does a Dreadnought count as a vehicle/warmachine? I guess if a Warmachine Warjack counts it probably does...
Golden demon says yes so id assume yes here too.
korocite
Aug 17 2012, 09:53 PM
QUOTE(Sync @ Aug 17 2012, 01:06 PM)

P.S. Does a Dreadnought count as a vehicle/warmachine? I guess if a Warmachine Warjack counts it probably does...
Yep, no problems from me.
Steve
Sync
Aug 21 2012, 04:00 PM
Here's my entry finished for this round!
For full 360* photos, check out this post:
http://descent-of-angels.blogspot.com.au/2...t-finished.htmlChaos Dreadnought
kajh
Aug 21 2012, 05:14 PM
That's really nice, Sync - great job!
Cya,
Andrew.
korocite
Aug 22 2012, 09:55 PM
@sync, I like the base colour and the tidy painting, but (at the risk of alienating the only other entrant) the metal work and the marine pack look unfinished. I think the pack needs some more variation in colour and the metal would look more realistic if it were toned down with a wash or two - it is looking a bit too shiny for a chaos dreadnought. Nice work on the base.
Steve
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.